Dealer Resources

Yes, when you are the right fit for our customers. We require alignment on values, a territory that is not awarded to another dealer, the capability to support installation, a desire to provide lifetime care, and a strong understanding of the commercial door industry. We are keen to hear from suitable representatives. Particular focus on potential representatives serving urban areas with a high density of commercial, shared family, and mixed-use buildings, therefore typically a high density of parking garages.

We are actively building our national network of dealers and representatives. Let's talk.

We provide a 5-year warranty, covering materials and workmanship, limited to 1m cycle on a Vertical Lift Gate.

Our sectional door has a 2-year warranty, covering materials and workmanship.

For our VLG, we offer a full refurbishment and warranty extension, giving another worry-free 5-year or 1 million cycles.

We recognize the need for some customers to spread the cost of a replacement door over multiple budget cycles. We offer interest-free payment terms for customers. Dealers are welcome to take advantage of these terms, which then are passed through to customers.

Our Sectional Door and Vertical Lift Gates are engineered for high-cycle, high-security parking garages, typically associated with multi-family, commercial, and mixed-use buildings.

Davis Door products have been engineered with commercial customers in mind.

Either, the primary tower and operator can be mounted on either side of the opening to suit your customers’ needs and specification.

Either, the door can be mounted either inside or outside the opening to suit your customers’ needs and specification

Vertical Lift Gates can support a variety of artistic sheeting and overlay materials. We work with several custom metal fabricators, allowing us to offer décor on our doors, including beautiful half-tone images and waterjet cut overlays.

Yes, we work with several fascia suppliers to mount fascia materials on our doors, providing seamless integration with the building exterior. We are confident that we can utilize most metallic and wood fascia products. Stone products are typically not suitable.

Yes, we can supply powder coated in any specified RAL color. We also offer custom powder coat color matching. We also offer a high-performance Kynar© coating.

This depends on the opening height you need to achieve and the number of panels. Our maximum number of panels is 6, so to find the minimum headroom…divide the opening height by the number of panels (6) and add 10 inches.

For example, for an 8’2” opening height, with our maximum of 6 panels, you need a minimum of 26” inches headroom.

If your building design allows more headroom, we will utilize this by increasing the panel height and decreasing the number of panels.

Please note that headroom is to the lowest point of obstruction, which may be a duct or pipe, and not to the actual ceiling.

If the headroom on the inside of the opening is insufficient, the door can be mounted on the exterior of the opening, which usually provides ample headroom. In an exterior-mounted application, a fixed header panel is installed at the top of the assembly that matches the design and construction of the operable door panels.

The Vertical Lift Gate can operate on incoming power of 120V (20A dedicated circuit)

OR

208V/460V 3 phase

Davis Door will send a factory representative to assist in the installation and commissioning of the door.

In addition to our on-site support, we provide full installation instructions in written and video format. We also provide a helpline, staffed by our expert installation team.

Call 1 (800) 561 6765 between 8 AM – 4:30 PM PST or email info@davisdoor.com.

Typically, 2-3 Days.

We maintain shelf stock on all standard mechanical components in support of our customers and dealers.

Typically, in cases where panel damage is sustained, it is normal that only a single panel needs to be replaced. We understand the importance of minimal downtime and will work with you to expedite manufacture of these bespoke items.

The door serial number can be found in a few places:

1. Stamped on the plate on the exterior of the bottom panel (center, at the bottom).

2. Stamped on the plate located on the head plate of the weight box tower (next to the operator).

3. Labeled on the end of each gate panel.

4. Identifying the door serial number is helpful for troubleshooting and ordering replacement parts.